Storing stations, Storing stations automatically ( travel store), Listening to stored stations – Blaupunkt SEATTLE MP57 7 647 453 310 User Manual

Page 19: Scanning receivable stations ( scan)

Advertising
background image

73

EN

GLISH

Change to the second page of the
"Tuner" menu by pressing the

NEXT

button

2.

Press the softkey "Sensitivity"

8 re-

peatedly until the desired sensitivity
level is displayed behind "Sensitivity".

When you have finished making your
changes,

press the

OK button

B.

Note:
The device stores the sensitivity value
set in the respective FM and AM wave-
band.

Storing stations

Storing stations manually

Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).

Tune into the desired station.

Briefl y press on the softkeys

6 to

;.

The assignment of all six memory locations
is displayed.

Press and hold down one of the softkeys
6 to ; for longer than two seconds
to assign the station to that button.

Storing stations automatically
( Travel Store)

You can automatically store the six stations
offering the strongest reception in the re-
gion (FM only). The stations are stored in
the FMT memory bank.

u

u

u

u

u
u

u

Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.

Press the

BAND button

?.

The "Tuner" menu is displayed.

Press the softkey "Travel Store"

9.

The storing procedure begins. "Travel Store"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.

Note:
If the priority for traffi c information is
active (the display shows the traffi c
jam symbol), only traffi c information
stations are stored.

Listening to stored stations

Select the memory bank or waveband.

Briefl y press on the softkeys

6 to

;.

The assignment of all six memory locations
is displayed.

Press the softkey

6 to ; where the

desired station is stored.

The stored station is played if it can be re-
ceived.

Scanning receivable stations
( Scan)

You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time in the menu to between 5
and 30 seconds.

u

u

u
u

u

Radio mode

02_SeattleMP57_gb.indd 73

02_SeattleMP57_gb.indd 73

08.03.2007 14:33:06 Uhr

08.03.2007 14:33:06 Uhr

Advertising