E-flite Cap 232 BP ARF - Manual (Page 27)

 4. Secure the receiver to the fuselage under
the wing using hook and loop tape. Route the
antenna wires according to the manual provided
with your radio system. Plug the servos into the
appropriate positions in the receiver.
Note:.Make.sure.all.the.wires.are.neatly.taped.
to.the.fuselage.to.prevent.them.from.getting.
entangled.with.the.linkages.
  5. Position a control horn on the aileron. The
horn will have the holes for the clevis in line
with the aileron hinge line, and fairly close to
the outer edge of the balsa. Mark the location
for the two horn posts using a felt-tipped pen.
27