E-flite P-51D Mustang BNF Basic - Manual (Page 10)

EN
AS3X Control Direction Test
This test ensures that the AS3X control system is functioning properly.
Assemble the aircraft and bind your transmitter to the receiver before
performing this test.
1. Fully lower the throttle.
2. Move the fl ap switch to full fl aps before performing this test.
IMPORTANT: The AR636 programming for this aircraft increases control sur-
face movement when fl aps are fully down.
3. Move the entire aircraft as shown and ensure the control surfaces move in
the direction indicated in the graphic. If the control surfaces do not respond
as shown, do not fl y the aircraft. Refer to the receiver manual for more
information.
Once the AS3X system is active, control surfaces may move rapidly. This is
normal. AS3X is active until the battery is disconnected.
Aircraft
movement
AS3X Reaction
Elev
ator
Aileron
Rudder
10