E-flite P-38/2 Motors/2 ESC Combo User Manual

E-flite Air equipment

Advertising
background image

Park 450 Brushless Outrunner Instructions

Thank you for purchasing the E-flite Park 450 Brushless Outrunner motor. This motor is an ideal
choice for the E-flite Mini Ultra Stick and small profile balsa 3D airplanes. The motor will provide great
performance on the scale planes such as the E-flite P-47 and sport 3D performance for planes such
as the Mini Funtana and Mini Edge.


Park 450 Brushless Outrunner Features:
Ideal for 3D park flyers 15- to 25-ounces and scale park flyers 20- to 30-ounces using 2- to 3-cell
1200–2100mAh Li-Po battery packs

• High Torque alternative to inrunner brushless motors
• Includes mount, prop adapters, and mounting hardware
• Quiet, lightweight operation – just 2.5 ounces (72 g)
• External rotor design, 4mm shaft can easily be reversed for alternative motor installations
• High quality construction with ball bearings and hardened steel shaft
• Slotted 12-pole outrunner design

Park 450 Specifications

Diameter: 28mm (1.1 in)

Case Length: 33mm (1.3 in)

Weight: 72g (2.5 oz)

Shaft Diameter: 4mm (.16 in)


EFLM1400

Kv: 890 (rpms per volt)

Io: .69A @ 8V (no load current)

Ri: .20 ohms (resistance)

Continuous

Current:

14A*

Max Burst Current: 18A*
Cells: 6-10 Ni-MH/Ni-Cd or 2-3S Li-Po

Recommended Props: 9x6 to 11x3.8 ‘Slow Flyer’ or 10x5 to 12x6 ‘Electric’

Brushless ESC: 20-Amp (EFLA311B)


* Maximum Operating Temperature: 220 degrees Fahrenheit
* Adequate cooling is required for all motor operation at maximum current levels.
* Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is
required for proper cooling and to avoid overheating the motor.
* Maximum Burst Current rating is for 3D and limited motor run flights. Lack of proper throttle
management may result in damage to the motor since excessive use of burst current may overheat
the motor.

Battery Choices:
There are many Li-Po battery brands on the market with several choices for consumers. We
recommend either E-flite or Thunder Power batteries and list some possible choices for the Park 450
Brushless Outrunner motor, all depending on the airplane application.

EFLB1011 7.4V 1200mAh 2-Cell LIPO,16GA

THP13202SPL

1320mAh 2-Cell 7.4V LIPO,16GA

EFLB1016 11.1V 1200mAh 3-Cell LIPO,16GA

THP13203SPL

1320mAh 3-Cell 11.1V LIPO, 16GA

EFLB1021 7.4V 1800mAh 2-Cell LIPO,16GA

THP19002S

1900mAh 2 cell 7.4V LIPO,16GA

EFLB1025 11.1V 1800mAh 3-Cell LIPO,16GA

THP19003S

1900mAh 3-Cell 11.1V LIPO, 16GA

EFLB1031 7.4V 2100mAh 2-Cell LIPO,16GA

THP21002SPL

2100mAh 2-Cell 7.4V LIPO,16GA

EFLB1035 11.1V 2100mAh 3-Cell LIPO,16GA

THP21003SPL

2100mAh 3-Cell 11.1V LIPO,16GA


Examples of Airplane Setups:

E-flite Mini Edge 3D ARF (EFL2225)
Comments – Sport 3D and aerobatic performance with good vertical power and top speed. Also
allows the use of the lightweight THP13203SPL battery for improved power to weight ratio.
Weight w/Battery: 26 oz (735g)
Prop: 12x6 Electric (APC12060E) or 11x3.8 Slow Flyer (APC11038SF)
Battery: 1320mAh 3-Cell 11.1V LIPO (THP13203SPL) or 2100mAh 3-Cell 11.1V Li-Po
(THP21003SPL)
ESC: 20A Brushless (EFLA311B)

Advertising