E-flite Taylorcraft 450 ARF - Manual (Page 10)

10 E-flite Taylorcraft ARF Assembly Manual
  8. Position the servo on the mounting plate so the arm is
centered in the notch.
  9. Use a pencil to mark the location of the servo
mounting tabs on the plate.
  10. Use 6-minute epoxy to glue the 5/16 x 5/16 x 1/2-
inch (8 x 8 x 12mm) mounting blocks on the plate.
  11. Use a pin drill and 1/16-inch (1.5mm) drill bit to
drill the two mounting holes for the servo in the blocks.