Bogen CAM8PRO - Manual (Page 10)

Installation
Note: Take the mixer out of the box and inspect for shipping damage. If there is obvious
physical damage to the outside of the mixer, contact the supplier of the mixer before you
begin installation.
Rack Mounting: To mount the CAM8PRO to a 19” rack, lift the unit up to the front of the
rack and secure it to the front of the rack with the necessary screws (not included with this
unit).
A. Turn all mixer Volume Control Knobs [Channel(s) (1), Main (2), and Auxiliary (3)] to zero.
Turn amplifier(s) volume controls to the 7 oʼclock position.
B. Connect Inputs.
Connect lead into desired pluggable terminal strip (6) on rear panel.
Press Input Pad Microphone/Line Switch (5) to appropriate position: “in” for line input or
“out” for MIC input. Note that the input from some mics is actually close to line level
(-20 dB) and for such mics the switch should be at “Line.” Set switch for all unused chan-
nels at Line level. The Auxiliary Input (4) is Line level only.
Page 10