HCO BG30L Quick Start Guide User Manual
HCO Camcorders
HCO BG30L Quick Start Manual
1.
In the package, you should receive:
Camera
Li-ion
Battery
Micro SD
Card
Power Adapter
Manual
Remotes
USB Cable
Mounting
Hardware
2.
Open the battery and cards slot compartment by push the
back cover down.
3.
Insert the SIM card and the Micro SD card as the way marked.
Connect the battery
cable to the port on
the left side of the
Micro SD card slot.
Then slide the back
cover back.
4.
Turn the camera on. You may need to connect the AC/DC
adapter if the battery runs low. Wait until the
the HCO logo screen, the menu will come up (blue screen).
5.
Go to the menu and format the Micro SD card:
press DOWN arrow → press OK → press LEFT or RIGHT arrow
to highlight YES → press OK.
6.
After format successfully, turn the camera off.
7.
Connect the camera to your computer via USB (supplied).
Turn the camera on. You will see USB mode on the camera
screen.
Power Adapter
Mounting
Hardware
Open the battery and cards slot compartment by push the
and the Micro SD card as the way marked.
Turn the camera on. You may need to connect the AC/DC
adapter if the battery runs low. Wait until the camera passes
up (blue screen).
Go to the menu and format the Micro SD card: Press MENU →
press LEFT or RIGHT arrow
urn the camera off.
Connect the camera to your computer via USB (supplied).
You will see USB mode on the camera
8.
You will have a removable drive show in your Computer. Open
that drive (folder). You will see three folders: AUDIO, MMS
and PICTURE.
9.
Open MMS folder, double click on PROFILE.TXT.
a text pad file as shown below.
10.
You will find the correct AT&T or T
the other side of this manual.
11.
After you put the correct settings for the wireless carrier you
are using. Save the file and turn the camera off.
le drive show in your Computer. Open
that drive (folder). You will see three folders: AUDIO, MMS
Open MMS folder, double click on PROFILE.TXT. It will open as
pad file as shown below.
T or T-Mobile network settings on
the other side of this manual.
After you put the correct settings for the wireless carrier you
are using. Save the file and turn the camera off.