HCO SR1-WCDi - Manual (Page 9)

8
Default
Restore all settings to factory default
values.
Information Show version of firmware on the camera.
Password
This option allows a 6 digits password to be
set.
Wireless
Send Mode
Choose to send the image Instantly, just
send the Daily report or just turn the
wireless function Off.
Send To Send the images to Phone, Email or Both.
Send Via
Choose to send the image via MMS (MMS
plan) or Internet (Data plan).
SMS
Control
Turning the SMS command function On or
Off. Turning the SMS command function On
will increase the power usage.
Update Para
If your wireless carrier’s network
parameters are not pre-programmed into
the camera from the factory, you will need
to use the Setup Tool to program in
manually. After you use the Setup Tool, a
MMSCFG.bin file will be generated and put
on the SD card. You will need to run Update
Para to write the settings to the camera.
Phone Input the recipient Phone number.
Email Input the recipient Email address.