HF scientific Stilling Chamber - Manual (Page 2)

HF scientific, inc.
Stilling Chamber Part # 20106
STILLING CHAMBER COMPLETE WITH AUTOMATIC AIR RELEASE
It is only used on applications where the OnLine Monitor is measuring a
flowing stream of water or other liquid. The stilling chamber is used to
remove air bubbles from the liquid before it reaches the flow through unit of
the on-line turbidimeter. Air bubbles may cause unstable or incorrect
readings on the monitor.
METHOD OF OPERATION
The stilling chamber is a cylinder approximately 2” (5cm) diameter x 26” (66
cm) long. The liquid enters the stilling chamber via the outlet fitting near
the top of the stilling chamber (see figure 1). As the liquid
Figure 1