Setting the time – HF scientific 19998 Triple Validation Turbidimeter - 0-100 NTU User Manual
Page 23
TVT 1 (5/02)
17
Rev. 2.6 (.pdf)
Select the correct month by pressing the
t or u button to change the displayed month.
When you have selected the proper month, press the
↵ button. After pressing the ↵
button, the second number on the upper LCD screen will start to flash: this number
corresponds to the day of the month.
Select the correct day by pressing the
t or u buttons to change the displayed day.
When you have selected the proper day, press the
↵ button.
8.4 Setting the Time
After pressing the
↵ button, the TIME block will be displayed and you will see the time
displayed on the upper LCD screen in 24-hour format. The number flashing corresponds
to the hour.
Select the correct hour by pressing the
t or u button to change the displayed hour.
When you have selected the proper hour, press the
↵ button. After pressing the ↵ button,
the second number on the upper LCD screen will start to flash: this number corresponds
to minutes.