Human Touch Foot Spa - Manual (Page 4)

humantouch.com
5 5
ENGLISH
humantouch.com
4
USING YOUR FOOT SPA
1. Choose a dry, level area in which to place your Foot Spa.
2. Plug the power cord into an appropriate power source.
3. Turn the temperature knob clockwise as far as it will go, to set the Foot Spa to maximum heat (Fig.1).
4. Allow the Foot Spa to warm up for ten minutes.
5. Remove your shoes and socks.
6. Place your feet into the Foot Spa, and enjoy!
7. If the temperature is too hot, turn the temperature knob counter-clockwise to lower it.
8. When finished, power off the Foot Spa and unplug it.
Turn the temperature knob clockwise as far as
it will go, to set the Foot Spa to maximum heat
Fig.1
The Foot Spa is not intended to be used as a step stool.
Standing on it with full body weight may result in damage and personal injury.
Specifications* Voltage: AC110-120V 60Hz
Watts: 60 W
Dimension: 15”L x 14”W x 6”H
Product weight: 9 Lbs.
*Specifications are subject to change without prior notice.