JK Audio CellTap - Manual (Page 3)

6
? Will CellTap work with my model
______ cell phone?
! As long as your wireless phone has a 2.5
mm earpiece jack and accepts a generic
3rd party earpiece or headset, you should
be OK.
? Can I talk on my handheld phone and
record the conversation using a Cell-
Tap?
! No, most phones detect the presence of
anything plugged into the headset jack and
immediately disable the phones micro-
phone and speaker.
? What if my phone does not have a 2.5
mm earpiece / headset jack?
! Many phone manufacturers sell an adapter
that allows connection of a 2.5 mm plug.
You can often find these adapters where
you purchased your phone, in electronics
stores, or on many websites.
FAQ’s
6
3
3
Operation
Connect CellTap between the 2.5 mm earpiece
jack of your cell phone and your earpiece or
headset. Now connect a tape recorder or pow-
ered speakers to the 3.5 mm mini jack. This
audio output contains a nice mix of both sides
of the conversation.
Group Listen - Simply connect a powered
speaker to the audio output jack and you will
have a new conferencing capability. Everyone
in the room can hear your conversation, but
only the person wearing the headset can talk to
the distant party. While this is not a speaker-
phone, in many cases it is better.
Note: Wireless phones generate substantial
radio frequency (RF) noise during a call which
can easily leak into audio cables or equipment.
Be sure to keep the wireless phone one to two
feet away from any audio cables or equipment.
It is also important to keep the wireless adapter
cord away from any other audio cords.