JK Audio ComPack - Manual (Page 7)

7
Features
11. Battery Test
Button / LED
21. Visual Ring
Indicator
20. Phone
Line Jack
12. Wireless Phone
Interface Jack
19. Handset
Interface Jack
18. Handset Type
Selector Switch
13. 3.5 mm
Line Input
17. Mic/Line Selector
for XLR Input
16. Female XLR
Input
14. Male XLR -
Output / Com Link
15. Headphone
Jack
The wireless interface on the ComPack works very well with
most cellular telephones. However, some wireless telephones
generate excessive RF noise which can be can be heard as a
“chattering” or “motor boat” sound. The noise from these par-
ticular telephones will be unacceptable for most broadcast ap-
plications.
13. 3.5 mm Line Input
The 3.5 mm input is a mono, line level input. This input can be
used at the same time as the XLR input.
14. Male XLR Mix Output / Com Link
The Male XLR output can be used in two ways: as a bal-
anced, fixed level mixed mono output or as a bi-directional
telecom link for your beltpack intercom system.
15. 1/4” Headphone Jack
The headphone output is a 1/4” 3-conductor jack. Both the tip
and ring of this jack contain the same audio signal. Either
mono or stereo headphones may be used.