JK Audio innkeeper LTD - Manual (Page 7)

7
Connecting Cables
Although each application will require a slightly different setup, there
are some cables that everyone can agree upon:
1. Phone Line - Connect the supplied RJ-11 phone line cable
between the jack marked “Line” and your wall jack. Be sure this
jack can support standard single-line analog telephone
operation.
2. Send Audio - Connect a line level audio signal from the output of
your other equipment such as a mixing console or PA system, to
the XLR Send jack on the innkeeper LTD.
3. Caller Audio - Connect the Caller output jack to a line level input
on your mixing console or other equipment.
4. Power - Connect the supplied AC power cord to the back of the
innkeeper LTD and then to an AC power outlet.
This device should be connected to an adequate surge
protective device at all times both for the power connector
and for the telephone line to avoid damage from lightning
or electrical surges.
Your innkeeper LTD is now ready to take calls. You may want to
connect an auxiliary phone to the innkeeper for call setup, or you
can simply use Auto-Answer or the Call button to answer an
incoming call.
Connection