JK Audio innkeeper PBX - Manual (Page 8)

4
Innkeeper PBX™ Broadcast Field Mixer
Getting to Know Your innkeeper PBX
Inputs & Outputs
1. Handset Jack
Connect your telephone handset to this jack.
2. Phone Jack
Connect this jack to the handset jack on your telephone using the supplied
handset jumper cable.
3. Handset Type Selector Switch
Use this switch to select the correct type of handset microphone that your
telephone uses.
A=Electret, B=Carbon, C=Dynamic
4. Caller Output
Male balanced XLR output contains only the caller’s voice.
5. Send 1 Input
Female balanced XLR input for signals going out to the phone line. Mic or
line level input.
6. Mic / Line switch
7. Sets the front end sensitivity of the Send 1 XLR jack. Set to Mic if you intend
to connect a dynamic microphone directly to the Send 1 jack. Set to Line if
you are connecting to the output of a mic mixer.
3 4 5 6 9 7 8 1 2