JK Audio Interloop - Manual (Page 17)

Reconnecting to a Device
When reconnecting to a device that is
still in Interloop’s pairing history, the
device that will be in Headset mode
should be powered up first and both
devices should be in Idle Mode. When
the Master device is turned on, it will
find the Headset device during its
power up cycle.
When reconnecting to your cell
phone, the switch on Interloop should
be set to Phone and the Interloop
should be turned on first.
When reconnecting to your
Bluetooth headset, the switch on
Interloop should be set to Headset
and the headset should be turned
on first.
Bluetoth Wireless Technology
11
Bluetooth Wireless Technology
Switching Between Phone
and Headset
The Role Select switch is only
monitored during the power-up
sequence. You must power-down,
select the desired function, then
power-up for the change to take effect.