JK Audio RemoteAmp Two - Manual (Page 6)

6
Connection
1. Connect your headphones to this 1/4” jack.
The 1/2 watt stereo headphone output
gives you a mix of the XLR line input and
the 3.5 mm Stereo Line In.
2. The unbalanced 3.5 mm stereo Earpiece
output jack provides a mix of the XLR Line
input and the 3.5 mm Stereo Line In.
3. Connect the output of your other audio
equipment to this unbalanced stereo
3.5mm Line In jack.
4. Connect the output of your audio console to
the XLR Line In jack. This input is line level
only and is not suitable for a microphone.
You can use both the balanced XLR and
unbalanced 3.5 mm inputs simultaneously.
The Stereo Line In allows recordings to be
mixed in with the audio from your console.
7
Connection
1 2 3 4