JK Audio THAT-1 - Manual (Page 2)

2
Handset w/
modular plug
Telephone line
to wall jack
Audio equipment or
powered speakers or
computer Mic input
Connection
THAT-1 connects between the handset and the base of
your telephone. Follow these simple steps…
1. Unplug the modular handset cord from your tele-
phone base.
2. Using the black handset jumper cord that we have
provided, connect the Telephone jack of THAT-1 to
the handset jack on your telephone base.
3. Plug your handset cord, and handset, into the Hand-
set jack on THAT-1.
4. Connect your audio equipment to the line input and
output jacks on THAT-1.
Not for use with telephones that have a keypad in
the handset.
7
a) The "line" to which you will connect the telephone
equipment (that is, your telephone number), and
b) The telephone equipment's FCC registration number. This
can be found on the bottom of your telephone equipment.
3. Repair Instructions
If it is determined that your telephone equipment is
malfunctioning, the FCC requires that it not be used and that it
be unplugged from the modular outlet until the problem has
been corrected.
Repairs to this telephone equipment can only be made by the
manufacturer or its authorized agents or by others who may
be authorized by the FCC. For repair procedures, follow the
instructions outlined under the warranty section of the manual.
4. Rights of the telephone company
If telephone equipment is causing harm to the network, the
telephone company may temporarily discontinue your
telephone service. If possible, they will notify you before they
interrupt service. If advanced notice is not practical, you will
be notified as soon as possible. You will be given the
opportunity to correct the problem, and you will be informed of
your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
proper functioning of your JK Audio product. If such changes
are planned, you will be notified.
If this telephone equipment is to be used with a telephone that
is leased or owned by another party, permission to connect
this telephone equiment to their telephone must first be
obtained.
FCC Registration (continued)