JK Audio Voice Path - Manual (Page 3)

10
Your new JK Audio product has been registered with the
Federal Communications Commission (FCC). This
product complies with the standards in Part 68 of the FCC
rules. The FCC requires us to provide the following
information:
1. Connection and use with the nationwide telephone
network
The FCC requires that you connect this telephone
equipment to the national telephone network through a
FCC registered telephone.
This equipment may not be used with Party Line
Service or Coin Telephone Lines.
2. Information for the telephone company
Upon request from your local telephone company, you
are required to provide the following information:
a) The "line" to which you will connect the telephone
equipment (that is, your telephone number), and
b) The telephone equipment's FCC registration
number. This can be found on the bottom of your
telephone equipment.
3. Repair Instructions
If it is determined that your telephone equipment is
malfunctioning, the FCC requires that it not be used
FCC Registration
3
Connection
Voice Path connects between the handset and the tele-
phone base of your telephone. Follow these simple
steps......
1. Unplug the modular handset cord from your tele-
phone base.
2. Using the black handset jumper cord that we have
provided, connect the telephone base jack of
VOICE PATH to the handset jack on the base of
your telephone.
3. Plug your handset cord, and handset (or headset)
into the handset jack on VOICE PATH.
4. Connect the From Phone cable to the mic input on
your computer.
5. Connect the To Phone cable to the line input on
your computer.