K-array KP102 - Manual (Page 20)

KP52/KP102
REV. A 20
14. SPECIFICATIONS
KP52
Acoustics
Speakers power handling 360 W (AES)
Max power 600 W 1
Impedance 8Ω or 32Ω (selectable)
Frequency range 100 Hz - 20 KHz.
SPL 1W / 1mt 96 dB 2
Maximum SPL 118 dB continuous - 124 dB peak
Coverage
Horizontal 90°
Vertical 10°- 45° (selectable)
Crossover
Type External Crossover required
Frequency High pass @100 Hz, 24 dB/oct suggested minimum
Transducers
Full range 6 x 3.15” Neodymium magnet with 1” voice coil
Power Audio Input
Connectors 2 x 4-pin Speakon
Wiring 1+ 1- (signal IN & LINK); 2+ 2- (through)
Selection Switch
Vertical pattern Spoot - Flood
Impedance 8Ω - 32Ω
Physical
Dimensions 8.8 x 50 x 11.8 cm (3.56” x 19.7” x 4,65”)
Weight 6 kg (13.23 lbs)
1. Maximum RMS applicable power for a musical signal, the
reference signal is the one proposed by EIAJ standard.
2. Measured @4 mt then scaled @1 mt
New materials and design are introduced into existing products
without previous notice. Present systems may differ in some
respects from those presented in this brochure.