Kino Flo VG3R Ballast Board User Manual
Page 3
Advertising
Ballast Board Removal
Ballast Board Installation
1) Remove ten (10) cover screws.
4) Install new ballast board and
three (3) nuts.
2) Remove AC input and output
connector and HO/Std connector.
5) Install AC input and output
connector and HO/Std connector.
3) Remove three (3) nuts on each
board.
6) Install ten (10) cover screws.
3
4Bank Ballast (BAL-410-S120)
is shown for illustration purposes.
Advertising