Krell S-300i - Manual (Page 17)

Back Panel Description, c o n t i n u e d
Krell S-300i 1 3
O u t . T h e output sends 12 VDC (12 V trigger) power on/off signals
to other Krell components and other devices that incorporate a 12
V trigger.
I n .The input receives 12 VDC (12 V trigger) power on/off signals
from other Krell components and other devices that incorporate a
12 V trigger.
The 12 VDC output current is limited to 30 ma.
Consult the owner’s reference of the components used in a custom
installation to take full advantage of the remote capability of the S-300i.
22 IEC Connector
The connector is for use with the provided IEC standard 15 amp
power cord.
23 Line Fuse
The 50/60 Hz line fuse protects the S - 3 0 0 i in case of overload or
m a l f u n c t i o n .
24 AC Power Button
Use this button to change the S-300i from off to the stand-by
m o d e .
Fuses must be replaced with the fuse value specified on the back panel.
P O W E R
N o t e s
N o t e