Laser Ammo 223 for AR-15 Laser Cartridge - Manual (Page 2)

User Guide
Unload the weapon.
Physically and visually inspect the chamber, bore, and magazine well to
ensure that all ammunition has been removed.
Unload ammunition from any magazines that will be used in training.
Store ammunition in an area that is separate from your training area.
Always personally verify that all ammunition has been removed
before training.
Do not allow any live ammunition in the training area.
Warning – firearms can cause serious injuries or death.
Unscrew the laser cartridge and insert the
battery pack according to the drawing
(flat side facing up). Reassemble the laser
cartridge carefully. Verify the threading is
fully closed and that there is no gap.
Attach the barrel adapter to the front of
the Cartridge (see picture).
Retract the bolt and engage the bolt stop
in the open position. Make sure the bolt is
held firmly by the stop
Do not continue if the bolt is not
held firmly or the bolt stop is not in good
working order.
While pointing the barrel down, insert the
laser cartridge into the firearm by
"dropping" it, barrel adapter first, through
receiver (breach) opening into the chamber.
Still pointing down, release the bolt stop.
Point the weapon at a safe backstop and
pull the trigger to verify that the unit is
properly installed and functioning.
Disassembly: Retract the bolt and engage
the bolt stop in the open position. Insert a
cleaning rod, flat side first, into the barrel
and push the Laser Cartridge gently out.
Remove battery when laser cartridge
is not in use.
Using the SureStrike Laser Cartridge not
according to the user guide will void the warranty.
All firearms are potentially dangerous and can cause a great harm, personal injury and
death. It is your responsibility and legal obligation to handle, load, unload, use, transport,
maintain and store your firearm in a safe manner.
No liability is expressed or implied for damage or injury as a result of installation or use of
this product. Warranty is limited to the replacement or repair of the original product only.