Laser Ammo Troubleshooting - Manual

Laser Ammo Customer Support, Troubleshooting guide
1
SureStrike does not fire in pistol what do I do?
1. Check the correct assembly when used in a pistol.
2. Examine the black striking pad on the top of the action cap. See if it is not
installed flush or has a large dimple or hole in it. A small dimple is normal. If it
has a deep dimple worn into it that might prevent the SureStrike from working
in the pistol. Assemble the SureStrike and test it out of the pistol by pushing
on the black striking pad with the tip of a dull pencil or equivalent. If it will fire
out of the pistol only, the cap is worn and must be replaced.