Brinkmann Pitmaster Delux Charcoal/Wood Smoker - Manual (Page 8)

7
Step 15
Attach wooden handle halves to metal
bracket as shown. Fasten one handle to
firebox lid and the other handle to cooking
chamber lid.
Step 16
Fasten the four shelf brackets to the
outside front of the cooking chamber and
four grill support brackets to the inside
using 4" x w" bolts, washers and nuts as
illustrated.
Step 17
Attach the two grill support brackets to
inside front of firebox using 4" x w"
bolts, washers and nuts.
Step 18
Insert the four 4" x 12" grill support
bolts into the pre-drilled holes in the back
of the cooking chamber and secure with
nuts.
Step 19
Insert the two 4" x 12" grill support bolts
into the pre-drilled holes in the back of
firebox and secure with nuts.
Step 20
Take one wooden shelf slat and align
holes with shelf bracket holes and attach
with
3 ⁄
16
" x 12" carriage bolts and nuts.
Repeat this procedure with the other
wooden shelf slat.
Step 21
Place the charcoal grate in firebox
allowing it to rest on the sides of firebox.
Step 22
Place cooking grills on top of grill support
bolts and brackets in cooking chamber.
Step 23
If you have purchased a smoker without a
temperature gauge, insert chrome push
plug into hole in lid of cooking chamber. If
the temperature gauge is included,
remove tightening ring from gauge. Drop
probe through hole and re-thread
tightening ring.
Cooking
Chamber
Cooking
Chamber
Chrome
Push Plug
Temperature
Gauge
Cooking Chamber
Grill Support
Bracket
Grill Support
Bolt
Wooden
Shelf Slat
3 ⁄ 16 " x 1 2"
Carriage Bolt
Shelf
Bracket
Inside of Cooking
Chamber
Firebox
Charcoal
Grate
4" Lock
Washer
10-24 Screws