LaserLyte TLB-1 v.1 - Low Rez Size User Manual
Laser target, Set up, Target usage
LASER TARGET
Set Up:
Remove rear panel and install the provided 3 AA batteries.
Insert screws into back panel and tighten down.
1
2
11
2
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw
WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
®
A Division of P&L Industries
101 Airpark Road - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
TLB-1
WARRANTY:
One Year Limited
Warranty.
+
-
+
-
+
-
AA
Target Usage:
To display your shot:
•Firing the red laser dot in the Display circle
will illuminate your shots on the target.
To reset your shots:
•Firing the red laser dot at the Reset circle
will clear the target. Turning the target OFF
and then ON will also clear the target.
Stand the unit up and position the round target facing shooter
.
Move switch to ON position.
With any LaserLyte® Laser Trainers fire the red laser dot in the
target area. The LED will light up within the red rings.
1
1
2
3
2
3
®
Laser
Target
Display
OFF
ON
Reset
TLB-1
OFF ON
®
Laser
Target
Display
OFF
ON
Reset
TLB-1
OFF ON
®
Laser
Target
Display
OFF
ON
Reset
TLB-1
Reset