OSD Audio RSUB300 - Manual (Page 3)

Warranty & Repair
All OSD Audio speaker products have 1 year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims.
During the warranty period OSD will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
OSD Audio may replace returned speakers with a product of equal value and performance. In such cases, some modifications to the mounting may be necessary and
are not OSD’s responsibility.
For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by OSD. The unit must be
returned to OSD at the owner's expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damaged
resulting from abuse or from servicing performed by an agency or person not specifically authorized in writing by OSD.
OSD Audio sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any OSD product purchased
from an unauthorized dealer or other source, including retailers, mail over dealers and online sellers will not be honored or serviced under existing OSD warranty
policy. Any sale of product by an unauthorized source or other manner not authorized by OSD shall void the warranty on the applicable product.
Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis of the retail
value of the parts and labor. To return for repairs, you must email customer service at [email protected] for a Returned Merchandise Authorization (RMA) number# then the
unit must be shipped to OSD at the owner's expense, along with a note explaining the nature of service required. Be sure to pack the speaker(s) in a corrugated container with
at least 3 inches of resilient material to protect the unit from damage in transit.
This Warranty Does Not Cover:
Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) • Any products that have been altered or modified • Any product whose
identifying number of decal, serial #, etc. has been altered, defaced or removed • Normal wear and maintenance.
Diagram 5
Not all receivers/amplifiers can safely operate 2 pair of speakers at the
same time. It is important that the amplifier or receiver’s output wattage
is comparable to the speaker’s power handling. Please refer to your
owner’s manual for reference.
When connecting any speakers to the amplifier or receiver, always make
sure the power is off. Locate the connection terminals on the back of
your receiver or amplifier. Always make sure to connect audio out from
the back of your receiver or amplifier to the speakers.
Step 5
Connect the speaker cable to the speaker cable terminals, matching
the proper polarity with your amplifier, + to + (red) and - to - (black).
Make sure to connect the right channel to the right speaker and the
left channel to the left speaker . Either channel may be attached to
either terminals set, however, be sure that polarity ( + and - ) is correct
on each channel or the performance of the speaker will be seriously
affected as one channel will cancel out the other.
OSD
Audio
OSD
Audio
L R
SURR BACK SPEAKERS SURR SPEAKERS FRONT SPEAKERS RIGHT FRONT SPEAKERS LEFT CENTER
L R L R L R
LEFT SPEAKER RIGHT SPEAKER Receiver/Amplifier
OSD Audio • 775 columbia st • Brea • CA • 92821 • www.osdaudio.com • Tel (888) 779-4968 • Fax (714) 256-8300