Photoflex LP-3939WS LitePanel Fabric White/Silver 39 x 39 inch - Manual

PROFESSIONAL PHOTOGEAR
visit photoflex lightingschool .com® for the best free learning resource! For detailed specifications, product tutorials and more, please visit www.photoflex.com®
LitePanel
The following steps are covered in
this instruction:
• Assembling the LitePanel frame
• Placing fabric on the frame
LitePanel Family Instruction Manual
Figure 2. Push the black
square tubing into the red
corners.
Figure 1. Place frame on a flat,
clean surface and unfold.
Sections are shock-corded to
keep pieces together.
Close up of the
crossbar attaching
to the frame.
Crossbar not
included.
Figure 3. Completed corner.
Figure 7. Place the connectors
of the crossbar over the frame.
Figure 5. Fit the straight lengths
of tubing into the red couplings.
Figure 4. Unfold the LitePanel
completely.
Figure 8. Push to secure in
place.
Figure 6. Snap the 39" or 77"
crossbar into place.
Figures 9/10. Attach the fabric by wrapping one corner of the fabric
over one corner of the frame, then attach the adjacent corner.
Figure 12. Work your way
around the frame.
Figure 13. Attach the final corner.
This will pull the fabric tight.
Figure 14. Your LitePanel is
now assembled.
Customer Support (800) 486-2674
email: [email protected]
Corporate Office (831) 786-1370 • FAX (831) 786-1371
97 Hangar Way, Watsonville, CA 95076
PHOTOFLEX ® WARRANTY
• Warranties only cover manufacturer’s defects and workmanship
• We reserve the right to inspect all merchandise returned (end users
and dealers) for warranty fulfillment.
• All returns must be accompanied by a receipt showing date of
purchase.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
Available Accessories:
• Legs
• Clips
• GripJaw
• GripSwivel
• Crossbar
Rev LitePanel 5/10/12