Photogenic Professional Lighting ION - Manual (Page 8)

8
To Remove the Battery Pack:
1. Press and hold the release latch located on the side of the inverter.
2. While holding the latch down, slide the battery pack toward the side of
the inverter with the release latch.
To Install the Battery Pack on the Inverter:
1. Align the four round posts on battery pack with the four slots on the
inverter housing.
2. Firmly press the battery pack down against the inverter.
3. Slide the battery pack until it aligns with the inverter and is secured
and locked by the release latch.