Bushnell TROPHY XLT - Manual (Page 8)

8
NECKSTRAP ATTACHMENT
Thread the ends of the neckstrap through the strap lugs on each side of the binocular, then back
through the plastic buckle. Adjust the position of the binoculars on your chest as they hang around
your neck to your preference by changing the length of the strap portion which passes through the lug
and buckle (by an equal amount on each side).
TRIPOD SOCKET
To attach the Trophy XLT to a tripod or monopod, unscrew (counter-clockwise)
the “B” logo cap which covers the threaded socket inside the center hinge,
and set it aside in a safe place. Use a compatible binocular tripod adapter,
such as the Bushnell model #161001CM, (an accessory bracket, shown here,
which attaches between the binocular and tripod) to attach your Trophy XLT
to any standard tripod in a horizontal position to provide a stable image during
prolonged viewing.
WATERPROOF / FOGPROOF
Your Bushnell Trophy XLT binocular has been designed and built utilizing the latest waterproof and
fogproof technology. The binoculars are O-ring sealed for complete moisture protection. Fogproof
protection is achieved from dry nitrogen purging that removes all internal moisture.
Binocular Tripod
Adapter (optional)
(Bushnell#161001CM)