Powers HydroGuard Thermometers - Manual

CONCEALED THERMOMETER KIT
Product #131-251 Model 2
Installation Instructions
IS-P-131_251
Need for Periodic Inspection/Maintenance: This product
must be tested periodically in compliance with local codes,
but at least once per year or more as service conditions
warrant. All products must be retested once maintenance
has been performed. Corrosive water conditions, inlet tem-
peratures over 200°F (93°C), and/or unauthorized adjustments
or repair could render the product ineffective for the service
intended. Regular checking and cleaning of the product’s
internal components helps assure maximum life and proper
product function.
WARNING !
Installation
n
1. Provide a 4 1 /
2
" (115mm) diameter wall opening in a vertical line
with the hydroguard.
2. Assemble items 4 through 7 using Teflon tape or pipe
compound on threads of item 4.
NOTICE
Rubber disc (item 6) holds bracket (item 5) securely in place.
3. Thread thermometer into assembly. Teflon tape or pipe
compound is recommended.
4. Pipe 1 /
2
" NPT top and bottom outlets from assembly as required
by the application.
5. Assemble the faceplate and assembly using the two screws
provided (item 1).
NOTICE
A silicon sealer is recommended for the gap between items 2 and
3 and between the faceplate and wall.
6. Distance from assembly outlet piping to wall surface is the
same as from the mixing valve outlet piping to the wall surface.
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use infor-
mation can result in death, serious personal injury,
property damage, or damage to the equipment.
Keep this Manual for future reference.
WARNING
USA: Phone: 1.800.669.5430 • Fax 1.847. 229.0526 • www.powerscontrols.com
Canada: Phone: 1.888.208.8927 • Fax 1.888.479.2887 • www.powerscontrols.ca
IS-P-131_251 1401 EDP# 6512205 © 2014 Powers
Warranty
n
The Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without
charge, equipment found to be defective in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written
notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been prop-
erly installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic
action. ThIS exPreSS warranTy IS In lIeu OF and excludeS all OTher warranTIeS, guaranTeeS, Or rePreSenTaTIOnS, exPreSS OF ImPlIed.
There are nO ImPlIed warranTIeS OF merchanTaBIlITy Or OF FITneSS FOr a ParTIcular PurPOSe. The Seller assumes no responsibility for repairs
made on the Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with
respect to material not manufactured by it.
A Watts Water Technologies Company
WARNING: This product contains chemicals known to the
State of California to cause cancer and birth defects or
other reproductive harm.
For more information: www.watts.com/prop65