RCBS Pro 2000 Auto Index Reloading Press - Manual (Page 4)

- 4 -
PRESS ASSEMBLY
1. Select a solid bench on which to mount the Pro 2000
Auto Index Press. You must use the two slots for
mounting holes (use casting as a template). For
benches with limited space, or to increase the
rigidity of your bench, try our Accessory Base Plate
(pn 09280), available through your local dealer. See
photo below.
RCBS Accessory Base Plate
2. Select an area with approximately one foot of
clearance on each side of the Pro 2000 Auto Index
Press. Install with two 3/8" bolts, see photo 1, length
to be determined by the thickness of your reloading
bench (mounting hardware not included). The Auto
Index Cam Bracket assembly has been pre-installed
and adjusted for your convenience.
Photo 1