BenQ FP591 User Manual
Page 35
BenQ LCD Color Monitor User's Guide
English 34
C. Refresh Rate Selection
There is no need to choose the highest possible refresh rate on an LC display. It is not technically
possible for an LC display to flicker. Even at a refresh rate of 60 Hz you will get an absolutely flicker-
free image. More important is that you make sure that you use one of the factory modes. In con-
trast to a modern CRT monitor, which is a multiscan monitor, the LC display is a multi-frequency
monitor. This means, the best results are only obtained by using the factory modes. You will find a
table with the factory modes in this user's guide. These modes, for example, are 60, 70 and 75
Hertz, but not 72Hz, for the native resolution of 1024x768. In Windows 95/ 98/2 000/ XP you can
change the refresh rate as follows:
1.
Double click the "Display" icon in the Control Panel.
2.
From the "Display Properties" window, select the "Settings" tab. Click the "Advanced..."
button in the bottom right corner.