Bogen BCWR Receiver - Manual (Page 4)

System Features
BCWR Dual-Channel Wireless Microphone Receiver
• Dual Receiver, Simultaneous 2-Channel Operation for 2 Transmitters (Ch. A, Ch. B)
• Infrared (IR) Signal Reception LED Indicators
• Channel A/B Mixed Audio Output RCA-type Connector
• Separate Channel A and Channel B Volume Controls
• Two IR Sensor Coaxial-type Inputs
BCWBT Body-Pack Transmitter
• Multiple Emitter Array of High-Efficiency Infrared Emission LEDs for Optimum IR Transmission
• "Power On" LED
• Channel A/B Selector Switch
• 3.5mm Locking Jack for Connection of Body-Pack, Lapel, or Headset Microphones
• Microphone Input Volume Control
• Belt Clip and Adjustable, Neck-Worn Lanyard
• Requires 2 NiMH AA Rechargeable Batteries (BCBRBP, optional) or 2 Alkaline AA Batteries (included)
BCIRS Infrared Sensor
• Multiple Array of Wide-Angle Infrared Sensitive LEDs
• 35-foot Connecting Cable with Coaxial-type Connector
• Includes Mounting Brackets
BCHM Headset
Microphone
• Ultra-light, adjustable boom arm
• Close-miked vocal pick-up
• Hands-free operation
• Cardioid polar pattern
BCWHT Handheld Microphone/Transmitter
(Optional accessory, sold separately)
• Multiple Emitter Array of High-Efficiency Infrared Emission LEDs for Optimum IR Transmission
• "Power On" LED
• Powerful Uni-Directional Dynamic Capsule for Optimum Audio, Minimum Handling Noise, and Maximum
Feedback Rejection
• Rugged Steel Mesh Ballscreen with Anti-Roll Ring
• Requires NiMH Rechargeable Batteries (BCHRBP, optional) or 2 Alkaline AA Batteries (included)
4
BCLM Lavaliere
Microphone
• Weighs less than one ounce
• Close-miked vocal pick-up
• Hands-free operation
• Omni-directional pattern BCBM Body-Pack
Microphone
• Weighs less than one ounce
• Mounts directly to BCWBT
• Hands-free operation
• Omni-directional pattern