RCBS Rifle Bullet feeder - Dillon Conversion Kit User Manual
Page 2
LIFETIME LIMITED WARRANTY
Your Rifle Bullet Feeder – Dillon Conversion Kit is
warranted to be free from defects in material or work-
manship for lifetime of the original consumer purchaser.
All RCBS products are intended for non-commercial use
by hobbyists. Any other use of these products will void
the warranty. Should you believe that your Rifle Bullet
Feeder – Dillon Conversion Kit is defective in material
or workmanship, you must return it to Ammunition
Accessories Inc. through its Oroville operation (herein-
after “Oroville Operations”) postage paid for evaluation.
If defective, the product will be repaired or replaced at
Oroville Operations’ option, at no charge.
Send a dated proof of purchase to Oroville Operations
for return shipping and handling, along with the Rifle
Bullet Feeder - Dillon Conversion Kit to:
Ammunition Accessories Inc.,
Oroville Operations
605 Oro Dam Blvd East
Oroville, California 95965
Warranty services cannot be provided without
meeting the above requirements.
THIS LIFETIME LIMITED WARRANTY DOES NOT
COVER DEFECTS OR DAMAGE RESULTING FROM:
CARELESSNESS, MISUSE, COMMERCIAL USE,
ABUSE, IMPROPER INSTALLATION, MODIFICATION,
OR NORMAL WEAR AND TEAR. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE LIMITED TO THE
DURATION OF THIS LIFETIME LIMITED WARRANTY.
OROVILLE OPERATIONS IS NOT LIABLE FOR
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT AND UNDER NO CIRCUMSTANCES
SHALL OROVILLE OPERATIONS BE LIABLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES.
HOWEVER, SOME STATES DO NOT ALLOW
LIMITATIONS ON INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
The above warranty provides the sole and exclusive
warranty available to the customer in the event of a
defect in material or workmanship in the reloading
product. This warranty gives you specific legal rights,
and you may also have other rights which vary from
State to State.
SAFETY
Reloading is an enjoyable and rewarding hobby that
can be conducted safely. But, as with any hobby,
carelessness or negligence can make reloading
hazardous. This product has been designed from
the beginning with the user’s safety in mind. When
reloading, safety rules must be followed. By observing
these rules, the chance of a hazardous occurrence
causing personal injury or property damage is
minimized.
GENERAL
• Use all equipment as the manufacturer recommends.
Study the instructions carefully and become thoroughly
familiar with the operation of the product. If you do
not have written instructions, request a copy from the
equipment manufacturer.
• Do not take short cuts. Attempting to bypass
established procedures is an invitation to
an accident.
• Observe “good housekeeping” in the reloading area.
Keep tools and components neat, clean and orderly.
Promptly and completely clean up primer and
powder spills.
• Reload only when you can give your undivided
attention. Do not reload when fatigued or ill, or
under the influence of medications or alcohol.
• Develop a reloading routine to avoid mistakes
which may prove hazardous. Do not rush - load
at a leisurely pace.
• Always wear adequate eye protection to protect your
eyes from flying particles. You assume unnecessary
risk when reloading without wearing safety glasses.
WARNING!
Before using the Rifle Bullet Feeder – Dillon Conversion Kit, read these instructions carefully to fully learn how to
safely operate the related reloading equipment. Failure to properly operate the related reloading equipment can result
in severe personal injury and/or equipment damage.
If you have any questions while assembling or operating this tool,
Call us at 1-800-533-5000 or 1-530-533-5191
Monday – Thursday 6:30 am – 4:00 pm Pacific Time
(hours may vary)
Or email us at
This instruction manual contains specific safety and operating information. It should be considered a permanent part
of your reloading equipment and remain with the equipment at all times for easy reference.
2