RCBS Tube Pistol Bullet Feeder User Manual

Page 2

Advertising
background image

LIFETIME LIMITED WARRANTY

Your RCBS Tube Pistol Bullet Feeder is warranted to

be free from defects in material or workmanship for

as long as the original owner owns it. This warranty

is extended only to the original consumer purchaser.

This warranty excludes any electrical components

or products. All RCBS products are intended for

non-commercial use by hobbyists. Any other use

of these products will void the warranty. Should

you believe that your Tube Pistol Bullet Feeder is

defective in material or workmanship, you must return

it to Ammunition Accessories Inc. through its Oroville

operation (hereinafter “Oroville Operations”) postage

paid for evaluation. If defective, the product will be

repaired or replaced at Oroville Operations’ option,

at no charge.

Send a dated proof of purchase to Oroville Operations

for return shipping and handling, along with the Tube

Pistol Bullet Feeder to:

Ammunition Accessories Inc.,

Oroville Operations

605 Oro Dam Blvd East

Oroville, California 95965

Warranty services cannot be provided without

meeting the above requirements.

THIS LIMITED LIFETIME WARRANTY DOES NOT

COVER DEFECTS OR DAMAGE RESULTING FROM:

CARELESSNESS, MISUSE, COMMERCIAL USE,

ABUSE, IMPROPER INSTALLATION, MODIFICATION,

OR NORMAL WEAR AND TEAR. THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE ARE LIMITED TO

THE DURATION OF THIS TWO YEAR LIMITED

WARRANTY. OROVILLE OPERATIONS IS NOT

LIABLE FOR DAMAGES IN EXCESS OF THE

PURCHASE PRICE OF THE PRODUCT AND

UNDER NO CIRCUMSTANCES SHALL OROVILLE

OPERATIONS BE LIABLE FOR CONSEQUENTIAL

OR INCIDENTAL DAMAGES. HOWEVER, SOME

STATES DO NOT ALLOW LIMITATIONS ON

INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

SO THE ABOVE LIMITATION OR EXCLUSION MAY

NOT APPLY TO YOU.

The above warranty provides the sole and exclusive

warranty available to the customer in the event of a

defect in material or workmanship in the Tube Pistol

Bullet Feeder. This warranty gives you specific legal

rights, and you may also have other rights which vary

from State to State.

SAFETY

Reloading is an enjoyable and rewarding hobby

that can be conducted safely. But, as with any

hobby, carelessness or negligence can make

reloading hazardous. This product has been designed

from the beginning with the user’s safety in mind.

When reloading, safety rules must be followed. By

observing these rules, the chance of a hazardous

occurrence causing personal injury or property

damage is minimized.

GENERAL

• Use all equipment as the manufacturer

recommends. Study the instructions carefully and

become thoroughly familiar with the operation of

the product. If you do not have written instructions,

request a copy from the equipment manufacturer.

• Do not take short cuts. Attempting to bypass

established procedures is an invitation to

an accident.

• Observe “good housekeeping” in the reloading

area. Keep tools and components neat, clean and

orderly. Promptly and completely clean up primer

and powder spills.

• Reload only when you can give your undivided

attention. Do not reload when fatigued or ill, or

under the influence of medications or alcohol.

• Develop a reloading routine to avoid mistakes

which may prove hazardous. Do not rush - load

at a leisurely pace.

• Always wear adequate eye protection to protect

your eyes from flying particles. You assume

unnecessary risk when reloading without wearing

safety glasses.

WARNING!

Before using the RCBS

®

Tube Pistol Bullet Feeder, read these instructions carefully to fully learn how to safely

operate the related reloading equipment. Failure to properly operate the related reloading equipment can result

in severe personal injury and/or equipment damage.

If you have any questions while assembling or operating this tool,

Call us at 1-800-533-5000 or 1-530-533-5191

Monday – Thursday 6:30 am – 4:00 pm Pacific Time

(hours may vary)

Or email us at

[email protected]

This instruction manual contains specific safety and operating information. It should be considered a

permanent part of your reloading equipment and remain with the equipment at all times for easy reference.

2

Advertising