Reloop CONTOUR CONTROLLER EDITION - Manual (Page 33)

ENGLI
sh
33
7.3 TROUBLEshOOTING
If any problem should arise while using Reloop Contour the following chart is the first drop-in
center:
7.4 TEChNICAL sPECIFICATIONs
The following specifications are not verified by Global Distribution GmbH in terms of plausibility
and accuracy:
Power Source USB 5V 500mA / DC: 6V, 1.5A; User Selectable
(mains adapter optionally available)
Dimensions 160 x 376 x 63.35 mm
Weight 1.92 kg
sYMPTOMs POssIBLE CAUsEs CORRECTIvE MEAsUREs
The device does not receive any power
when turning it on via the ON/OFF Button
-B34-.
USB cord or mains adapter are not correctly
connected.
Check whether the USB cord is correctly connected
to a free USB port of your computer and Contour‘s
USB port -B38-. Please also check whether the mains
adapter is connected correctly to the mains connection
-B36-.
The controller‘s LEDs are only weakly lit
and the device does not react.
The power supply is not sufficient. Connect your computer to a secured power line. Also it
is necessary to connect the included mains adapter to
the corresponding jack -B36-.
The DJ software does not show any reac-
tion to the usage of any of the contoller‘s
control elements.
Traktor LE is not configured corectly.
Traktor Pro is not configured correctly.
Use the included Traktor LE version, start the Setup Wi-
zard again. Refer to the paragraph „Traktor LE Setup“
in the chapter „Computer Configuration“.
When using Traktor Pro the mapping has to be loaded
again. To do so follow the instructions in the paragraph
„Trakto Pro Configuration“ in the chapter „Computer
Configuration“.
A problem occurs that is not listed in this
chart.
Various causes. Visit www.reloopdj.com/forum, in order to get support
regarding your Reloop products.