Application in accordance with regulations, Maintenance, De ut s ch – Reloop 10TION User Manual

Page 9: Engli sh

Advertising
background image

DE
UT
S

CH

9

E

ngli

SH

- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This

deviceshouldonlybecleanedwithadampcloth.Neverusesolventsorcleaningfluidswitha
petroleum base for cleaning.

- When relocating, the device should be transported in its original packaging.
- Whenstartingoperation,thecrossfadersandvolumecontrolsofyouramplifiermustbesetto

minimum level. Bring the loudspeaker switches into the “OFF” position. Wait between 8 to 10
seconds before increasing the volume to avoid shot noise created by transient effect, which could
cause damage to loudspeakers and the diplexer.

- Devices supplied by voltage should not be left in the hands of children. Please exercise particular

care when in the presence of children.

- At commercial facilities the regulations for the prevention of accidents as stipulated by the orga-

nization of professional associations must be observed.

- At schools, training facilities, hobby and self-help workshops the operation of the device must be

monitored with responsibility by trained staff.

- Keep this operation manual in a safe place for later reference in the event of questions or prob-

lems.

aPPliCaTiOn in aCCORDanCE WiTH REgUlaTiOnS

- This device is an external USB audio interface for connection to a computer.
- If the device is used for any other purposes than those described in the operation manual, da-

mage can be caused to the product, leading to exclusion of warranty rights. Moreover, any other
applicationthatdoesnotcomplywiththespecifiedpurposeharboursriskssuchasshortcircuit,
fire,electricalshock,etc.

- The serial number determined by the manufacturer must never be removed to uphold the warran-

ty rights.

MainTEnanCE

- Check the technical safety of the device regularly for damage to the mains line or the casing, as

well as for wearout of wear parts such as rotary and sliding switches.

- If it is to be assumed that a safe operation is no longer feasible then the device must be discon-

nected and secured against accidental use. Always disconnect the mains plug from the outlet!

- It must be assumed that a safe operation is no longer feasible if the device bears visible defects,

if the device no longer functions, following longer storage under unfavourable conditions or after
major transport stress.

Advertising