Reloop TERMINAL MIX 8 - Quick Start Guides - Manual

ENGLISH 1
TERMINAL MIX 8 QUICK START GUIDE
VERSION 1.1
Thank you for purchasing the Terminal Mix 8
Reloop‘s new flagship performance controller
developed for Serato DJ.
Here are the steps to get started:
1) Visit the link below to get your FREE copy
of Serato DJ, www.serato.com/dj/license/code
Note:
Please use the serial number on the Serato
DJ voucher included in the package to
activate software.
If you are a PC user, please visit the
Terminal Mix 8 product site at
www.reloop.com and head to the download
section to download and install the PC ASIO
driver. Mac users do not require a special
driver.
2) Now connect the Terminal Mix 8 to your
computer via USB; also connect the
included power supply and run either the RCA
(unbalanced) cables or XLR (balanced) cables
to your speakers or amplifier. Don‘t forget to
connect your headphones to one of the two
jack inputs on the front panel.
3) Power on your unit, start the Serato DJ
software and start mixing.
Note:
Make sure, when turning on the power, to have
your master and headphones volume low and
slowly increase.
GET READY TO TAKE OFF
SPEAKERS
XLR / RCA
POWER SUPPLY
HEADPHONES
USB CABLE