Reloop IPHONO 2 - Manual (Page 11)

ENGLISH
11
- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) condi-
tions. Keep the device away from direct exposure to the sun and heat sources such as radiators, ovens,
etc. (even during transport in a closed vehicle). Always ensure sufficient ventilation.
- The device must not be operated after being taken from a cold environment into a warm environment.
The condensation caused hereby may destroy your device. Do not switch on or operate the device until
it has reached ambient temperature!
- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This de-
vice should only be cleaned with a damp cloth. Never use solvents or cleaning fluids with a petroleum
base for cleaning.
- When relocating, the device should be transported in its original packaging.
- Devices supplied by voltage should not be left in the hands of children. Please exercise particular care
when in the presence of children.
- At commercial facilities the regulations for the prevention of accidents as stipulated by the organizati-
on of professional associations must be observed.
- At schools, training facilities, hobby and self-help workshops the operation of the device must be moni-
tored with responsibility by trained staff.
- Keep this operation manual in a safe place for later reference in the event of questions or problems.
APPLIcATIoN IN AccoRDANce
WITh ReGULATIoNS
- This device is a professional interface to digitally transmit analogue signals such as, for example, from
a turntable or a tape deck via USB to a computer. The iPhono 2 is ideal for archiving old vinyl or tapes
on a computer and/or for burning onto a writable medium like a CD. The device is hooked up between a
signal source and a computer.
- This product is authorised for connection to computer USB ports and is designed exclusively for indoor
application.
- If the device is used for any other purposes than those described in the operation manual, damage can
be caused to the product, leading to exclusion of warranty rights. Moreover, any other application that
does not comply with the specified purpose harbours risks such as short circuit, fire, electrical shock,
etc.
MAINTeNANce
- Check the technical safety of the device regularly for damage to the mains line or the casing, as well as
for wearout of wear parts such as rotary and sliding switches.
- If it is to be assumed that a safe operation is no longer feasible then the device must be disconnected
and secured against accidental use. Always disconnect the mains plug from the outlet!
- Disconnect the USB cable from your computer.
- It must be assumed that a safe operation is no longer feasible if the device bears visible defects, if
the device no longer functions, following longer storage under unfavourable conditions or after major
transport stress.