Reloop RMP-2 MK2 B - Manual (Page 27)

A) Track/Folder
Indicates the number of the current track or folder (folder for MP3-CD).
B) Time Mode
Indicates if the player shows the elapsed time of a track (nothing on display),
the remaining time of a track (the display reads "Remain") or the remaining
time of the entire CD (the display reads "Total Remain"). Use the Time button
-7- to switch between the modes.
C) Time
Indicates the time in the chosen Time mode in minutes, seconds and frames
(1/75 min.).
D) Playing Address
Visualises the time display and increases or decreases, depending on the
Time mode. Shortly before a track ends, the entire bar flashes.
E) Anti-Shock Memory Display
Indicates how much music is saved in the Anti-Shock Memory and if the
Instant Start function is available. "19" is the maximum memory value and
represents 10 seconds for the anti-shock memory.
F) Pitch Display
Indicates the set pitch value of a track in per cent.
G) Key Lock
Indicates if Key Lock has been activated (shows the padlock symbol). If Key
Lock is activated, the track's tone pitch remains the same when the tempo
changes.
H) BPM Status
Indicates if the Auto BPM Counter (display reads "Auto BPM") or manual BPM
Counter (display reads "BPM" only) is activated.
I) BPM Display
Indicates the current BPM value of the track.
J) Dot Matrix Information Display
Indicates the name of the folder, artist and title while playing an MP3 CD with
ID3 tag or an audio CD with CD text. To change between the name of a folder,
artist and title of an MP3-CD, press the Track Wheel -4-. This information
display animates a virtual disk which shows the direction in which the CD
turns and if the Jog Wheel has been touched while in Scratch mode. While in
the pre-set menu, the necessary settings are made in the Dot Matrix
Information Display.
K) CUE
Indicates if the player is in Cue mode (the display reads "Cue").
L) Pause
Indicates if the player is in Pause mode (the display reads "||").
M) Direction
Indicates if the player is in Forward, Reverse or Stop mode.
N) CD/MP3 Mode
Indicates if an audio CD (the display reads "CD") or an MP3-CD (the display
reads "MP3") is playing.
O) Auto-Cue Status
Indicates if Auto-Cue is activated (the display reads "Auto Cue"). To
de-/activate Auto-Cue press and hold the Single/Continue button -8- for two
seconds.
P) Play Mode
Indicates if the player is in Single mode (the display reads "Single") or in
Continue mode (nothing on display).
Q) Reloop
Indicates if the player has stored a loop which can be prompted with the
Reloop button -14- (the display reads "Reloop"). When "Reloop" flashes, the
loop is active.
27
ENGLISH
IM_RMP2_MK2.qxp 14.01.2009 15:23 Uhr Seite 27