BenQ FP71V+ - Manual (Page 22)

22 How to adjust your monitor
How to adjust your monitor
A Look at the Control Panel
There are 7 keys for user’s control including “Enter”, “
W
” , “
X
”, “Exit” , “Mode” , “ iKey ” and a
power switch. The following descriptions are the introduction of these keys & switch.
1. “ iKey ” : Adjust vertical position, phase, horizontal position and pixel clock automatically. When
the Mode Demo is on, press “ iKey ” will turn the Mode Demo off.
2. “Mode” key: Switch between different modes, including Standard, Movie 1, Movie 2, and Photo.
3. “Exit” key: Back to previous menu or exit OSD. This key is also the hot key for volume.
4.
W
(Left) key: For Left/Decrease adjustment. This key is also the hot key for Contrast.
5.
X
(Right) key: For Right/Increase adjustment. This key is also the hot key for Brightness.
6. “Enter” key: Activate OSD, enter sub menu, select items, confirm selection.
7. “Power”: Turn the power on or off.
Hot Key Mode
Brightness and Contrast hot key
8
Press
X
to enter Brightness menu, then press
the
W
or
X
keys to adjust the degree of
brightness and press “Exit” to exit the OSD.