Replay XD Prime X - Manual (Page 3)

3
G
EN
ER
A
L
E N
GENERAL CONSIDERATIONS
Please take note of the following guidelines when using your Replay XD camera:
• Charge camera immediately after unboxing, your camera comes up to 70% charged.
• Avoid opening the front bezel or rear caps in damp or humid conditions.
• Clean the lens with a micro fiber, anti static cloth for a clear image.
• The camera has an optimal working temperature range of -20°C to 60°C (-4°F to 140°F).
• When you’re using your Prime X or charging the battery, it is normal for Prime X to get warm. The exterior
of Prime X functions as a cooling surface that transfers heat from inside the unit to the cooler air outside.
• Power off the camera before removing the memory card to ensure data safety.
KEEPING PRIME X WATERTIGHT
• Prime X is waterproof up to 3 meters or approximately 10 feet.
• Clean off any salt water, dust or debris from the camera immediately after use.
• Intense water applications (more than 3 meters) require a Prime X DeepDive 197 housing.
• The camera is only waterproof to 3 meters when the o-rings are in excellent condition and
front bezel and rear cap is tightened securely.
DO NOT short-circuit the charging terminals
DO NOT open camera body
WARNING