Replay XD XD1080 - Manual (Page 8)

A LI G N M EN T
There are a few references for accurately aiming and aligning your Replay XD1080.
1. The Start REC button should always point up or at the 12 o’clock position for a level horizon.
2. The silver sight markers are at 3 o’clock & 9 o’clock and can act as a horizontal level.
3. The red sight markers are at 12 o’clock & 6 o’clock and can act as a vertical level.
4. The laser etched logos on the side of the Replay XD1080 are level and can act as tilt indicators.
5. To make sure you are aiming your Replay XD1080 in the desired direction, simply look down the length of the
housing from the rear–forward as if you’re looking through a telescope. It’s that easy.
12
9
6
3