Revel C50 - Manual (Page 4)

Figure 2. The REVEL PER-
FORMA C50 transducer and
connection locations.
DESCRIPTION
The REVEL PERFORMA C50 loudspeaker uses two 6.5-inch (165
mm) ceramic-composite woofers, a 4-inch (102 mm) ceramic-com-
posite midrange, and a 1-inch (25 mm) aluminum-dome tweeter.
Combined with an individually-optimized crossover network, this
transducer arrangement provides a uniform “listening window” or
area in which the sound varies little. The dual high power-handling
woofers and high-order crossover networks assure an extraordinary
dynamic range capability with very low dynamic compression. Full
magnetic shielding allows use near a video monitor.
WOOFERS
The two 6.5-inch (165 mm) woofers feature:
• 1.2-inch (30.5 mm) diameter voice coils wound on glass-rein-
forced Kapton ® bobbins for outstanding dynamic capability and
freedom from compression.
• Ceramic-composite cones feature an optimum combination
of stiffness and low mass for low coloration and distortion, and
fully-pistonic operation throughout their entire operating range.
• Massive motor system and specially vented spiders for
high-power handling and low dynamic compression.
• Die-cast basket to eliminate coloration from resonances.
MIDRANGE
The 4-inch (102 mm) midrange features:
• 1-inch (25 mm) diameter voice coil on a glass-reinforced
Kapton ® former for extraordinary power handling and freedom
from distortion.
REVEL PERFORMA C50
Owner’s Manual
4
On Top of
Monitor Flush Mounted Stand
Mounted 0 +.5 -.5 +1 -1
Placement
Compensation
(See Owner's Manual) High Frequency
Level (dB)
Revel
Northridge, California
Made in U.S.A.
Serial No.
REVEL PERFORMA
C50 Front (without grille)
REVEL PERFORMA
C50 Rear
Woofer
Tweeter
Woofer High-Frequency
Level Control Placement
Compensation
Control
Midrange
Connector Connector