Richter KSE-C/F Series Safety Valves User Manual
Safety valves, Series kse/f, kse-c/f, With certification
Advertising
INSTALLATION AND OPERATING MANUAL
Keep for future use!
This operating manual must be strictly observed before
transport, installation, operation and maintenance
Subject to change without notice.
Reproduction is generally permitted with indication of the source.
© Richter Chemie-Technik GmbH
9530-050-en Revision 04 Edition 03/2009
Series KSE/F, KSE-C/F
Safety Valves
with certification
spring-loaded
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- INSTALLATION AND OPERATING MANUAL
- List of Contents
- Relevant documents
- 1 Technical data
- 2 Safety
- 3 Safety notes for applications in potentially explosive areas based on the Directive 94/9/ EC (Atex 95)
- 4 Safety note for valves, certified to Clean Air Act (TA Luft)
- 5 Transport, storage and disposal
- 6 Installation
- 6.1 Sizing of the inlet line
- 6.2 Sizing of the outlet line
- 6.3 Valve connecting dimensions
- 6.4 Flange caps and gaskets
- 6.5 Direction of flow and installation
- 6.6 Grounding
- 6.7 Installation
- 6.9 Gas-tight design (Option)
- 6.10 Signal transmitter (Option)
- 6.11 Design for highly permeating media (Option)
- 6.12 Shortened or no lifting lever (Option)
- 6.13 Travel stop (Option)
- 7 Operation
- 8 Malfunctions
- 9 Maintenance
- 9.1 Screw connections
- 9.2 Cleaning
- 9.3 Modification of the safety valve
- 9.4 Adjustment of the test pressure
- 9.5 Important notes on dismantling / installation
- 9.6 Replacement of components
- 9.7 Dismantling KSE/F 50/80, 80/100, 100/150 KSE-C/F 80/100, 100/150
- 9.8 Assembly KSE/F 50/80, 80/100, 100/150 KSE-C/F 80/100, 100/150
- 9.7 Tests
- 10 Drawings
- Declaration of conformity
- Safety Information / Declaration of No Objection