Richter BCV/F (ASME) Series Check Valves - Manual (Page 3)

Series CV/F, CVV/F, BC/F, BCV/F
Page 3
9550-050-en Revision 10
TM 8462 Edition 02/2012
1 Technical data
Manufacturer :
Richter Chemie-Technik GmbH
Otto-Schott-Str. 2
D-47906 Kempen
Telephone: +49 (0) 2152 146-0
Fax:
+49 (0) 2152 146-190
E-Mail: [email protected]
Internet: http://www.richter-ct.com
Designation :
Ball Check valves
Series CV/F
solid ball, acc. ISO
Series CVV/F hollow ball, acc. ISO
Series BC/F solid ball, acc. ASME
Series BCV/F hollow ball, acc. ASME
Certified to Clean Air Act (TA Luft)
Strength and tightness (P10, P11) of the pressure-
bearing body tested to DIN EN 12266-1.
Gas-tight (P12) in the seat to DIN EN 12266-1,
leak rate D
Face to face CV/F, CVV/F
DIN EN 558-1 basic series 1, ISO 5752 series 1
Face to face BC/F, BCV/F
Peabody-Dore
Flange connecting dimensions:
CV/F, CVV/F
DIN EN 1092-2, type B (ISO 7005-2, type B) PN 16 or
flanges drilled to ASME 16.5 Class 150
BC/F, BCV/F
ISO 7005-2, type B PN 16
ISO 7005-2, type B PN 20
Materials :
Body material: Ductile cast iron EN-JS 1049 /
ASTM A395
Lining material: PFA .../F
On request: antistatic …/F-L
highly permeation-resistant …/F-P
Temperature range :
See pressure-temperature diagram in Section 1.5.
Operating pressure: from vacuum to max. 16 bar
See pressure-temperature diagram in Section 1.5.
Size in mm:
CV/F, CVV/F
DN 15, 20, 25, 40, 50, 65, 80, 100
DN 150 - 6“ series of BC/F, BCV/F
BC/F, BCV/F
½", ¾“ - DN 15, 20 series of CV/F, CVV/F
1", 1½", 2", 3", 4", 6”
Weight:
CV/F, CVV/F
DN 15 20 25 40 50 65 80 100
ca. kg 3.2 3.8 5.2 9.1 12.6 15 25 40
BC/F, BCV/F
DN 1“ 1½“ 2“ 3" 4" 6"
ca. lbs 8.2 13.9 18.5 47.6 76.0 102.6
ca. kg 3.7 6.3 8.4 22 35 47
Installation position: horizontal, inclined,
vertical
See Section 6.2.
Dimensions and individual parts :
See sectional drawing in Section 10.
Wear parts: Ball
1.1 Type plate, CE and body
markings
The stainless steel name plate is undetachably riveted
to the body.
If the operator attaches his identification, it must be
ensured that the valve matches the application in
question.
Example:
Type plate with CE marking CV/F
Type plate with CE marking BC/F
No CE marking is permissible for the sizes 15, 20 25,
½“ and ¾“; the name plate therefore has no CE
marking.