RiME LITE Softbox - Manual (Page 6)

6
Assembling Rime Lite softbox
1. Check each hole number on Speedring.
2. Insert Rods into speedring according to Diagonal direction.
- Square & Rectangular box = G1 – G3 – G2 – G4
- Strip box = S1 – S3 – S2 – S4
- Octagon box = G1 – G3 – G2 – G4 – B1 –B3 – B2 – B4
Exception -Grand softbox = 1 – 2 – 3 – 4 – 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 – 15 – 16
3. After completing inserting the rods, check out each rod is inserted correctly.
4. Tuck up the release corner of the softbox like below images.
Installing Inner diffuser: Connect each hook to the strap of inside of the softbox.
Attaching Front Diffuser: Attach front diffuser on the Velcro of softbox.
 Refer to a video entitled “How to set up Rime Lite softbox” on Youtube
Grandsoftbox