Rite-Ride 2350 - Manual (Page 6)

21-8279 08-08 NBD-15863-1
DESCRIPTION QTY.
HEAT SHIELD 1
CLAMPS 2
P
ARTS
L
IST
EXHAUST PIPE
OPEN AIR
SPACE
OPEN AIR
SPACE
CLAMPS
S
TEP
1
Bend the heat shield middle tab out at a 90 degree
angle and bend the heat shield again half the distance up
the tab at a 90 degee angle to form a "L" shape refer to
Figure "A".
S
TEP
2
Mount the heat shield between the air spring and the
exhaust pipe. Mount the heat shield using the clamps
provided see Figure "B". Maintain clearance between
heat shield and moving axle, lines, etc...
S
TEP
3
Bend the heat shield around the exhaust pipe, while
allowing for open air space of 1/2" to 1" as shown in
Figure "C".
BEND 1
90°
BEND 2
90°
BEND 1
90°
BEND 2
90°
Figure "A"
Figure "B" Figure "C"