SCHOEPS VMS 5 U - Manual (Page 4)

4
The VMS 5 U is designed for indoor
and outdoor professional recording
applications. Its features include:
– 48 Volt phantom powering
– Special input for SCHOEPS active
Y-cable
– Switchable M/S matrix
– Frequency range: 20 Hz - 80 kHz
(-3 dB)
– Headphone output, switchable
(before or after the M/S matrix)
– Can be operated from internal bat-
teries or external power
– Automatic “glitch-free” switchover
to battery powering if the AC supply
is interrupted
– Rechargeable batteries are automati-
cally protected from extreme dis-
charge
– Durable, high-quality switches and
connectors (gold-plated contacts)
– Lightweight, robust all-metal housing
1. Inserting batteries
The VMS 5 U operates from six AA
(LR 6) cells (included). Primary cells
(preferably alkaline) can be used, or
rechargeables such as NiCd or NiMH.
To insert batteries, turn the unit off
and open the battery compartment on
the underside by turning the slotted
button in the lid (perhaps with the aid
of a coin) one quarter turn in either
direction.
Please note:
The orientation of the batteries is
shown on the battery holders:
All batteries must go in the
same direction!
Make sure that the battery contacts
are kept clean. If necessary, clean the
contacts with a pencil eraser.
After inserting batteries, close the
battery compartment lid and lock it by
turning the slotted button a quarter
turn in either direction until it clicks
into place.